Fisioterapia e reabilitação em Portugal : o financiamento como factor crítico do desempenho

RESUMO - Num contexto em que a prestação de cuidados de Fisioterapia e Reabilitação é identificada como apresentando uma desigualdade e desajustamento da oferta regional superior à dos restantes cuidados de saúde, assim como uma falta de adequação dos preços praticados, perante as condições de oferta e procura actualmente existentes, o presente trabalho tem por objectivo investigar, no domínio do Desempenho, a influência do Financiamento na definição da prestação destes cuidados, tendo como pressuposto genérico que as decisões estratégicas e a reestruturação produtiva das organizações de saúde são condicionadas pelo sistema de preços. Considera-se que o actual sistema de Financiamento/Pagamento provoca um constrangimento na qualidade da resposta destes cuidados a dois níveis: um primeiro nível, ao colocar o pagamento no âmbito dos Meios Complementares de Diagnóstico e Terapêutica (MCDTs) a contratar pelo Serviço Nacional de Saúde, com isso determinando a configuração organizativa do sistema; um segundo nível de constrangimento que incide sobre as estruturas das organizações prestadoras, pela modelação que induz, nomeadamente a nível da sua produção. Na impossibilidade de tratar as duas dimensões do problema, pela falta de indicadores de desempenho deste sector, analisou-se, relativamente ao segundo nível de constrangimento, a produção de fisioterapia de três organizações que, potencialmente, teriam o mesmo o mesmo perfil de oferta por se enquadrarem num mesmo perfil de procura. Os resultados reflectem o pressuposto genérico do trabalho e abrem espaço para colocar como futura hipótese de investigação a razão da(s) causa(s) que poderão estar subjacentes à discrepância encontrada na média de tratamentos por sessão (duas vezes e meia) na produção das duas organizações que foi possível comparar.------------------- ABSTRACT - In a context where the provision of Physical Therapy and Rehabilitation care is identified as having a regional mismatch of supply and inequality above all the others health cares, and a lack of adequacy of prices in the current conditions of supply and demand, the present work has, as main purpose, to investigate, in the field of Performance, the Payment’s influence in shaping the provision of such health care. The general assumption tracking this analysis is that the strategic decisions on productive structure of health care organizations are influenced by the price systems. It is considered that the current Finance / Payment system causes two levels of constraints on the quality of such health care: a first constraint, as it putts its payment under the Supplementary Means of Diagnosis and Therapy (MCDTs), witch ends up establishing the organizational setup of the system; a second level of constraint by modelling the internal structure of these organizations. The lack of indicators characterizing the performance of this sector, addressed the present study to the second dimension, in witch was analysed the physical therapy production in three organizations that, potentially, would have the same profile of supply responding to similar characteristics of demand. The results reflect the above mentioned general assumption that supported the work, and leave an open space for future research, about the reason (s) that lay behind the discrepancy found between the average of treatments per session (two and a half times) in

Spatial neighborhood matrix computation: Inverse distance weighted versus binary contiguity

Paper presented at Geo-Spatial Crossroad GI_Forum, Salzburg, Austria.

Upgrade of an experimental volumetric unit for gas adsorption equilibrium studies

In this work, a volumetric unit previously assembled by the research group was upgraded. This unit revamping was necessary due to the malfunction of the solenoid valves employed in the original experimental setup, which were not sealing the gas properly leading to erroneous adsorption equilibrium measurements. Therefore, the solenoid valves were substituted by manual ball valves. After the volumetric unit improvement its operation was validated. For this purpose, the adsorption equilibrium of carbon dioxide (CO2) at 323K and 0 - 20 bar was measured on two different activated carbon samples, in the of extrudates (ANG6) and of a honeycomb monolith (ACHM). The adsorption equilibrium results were compared with data previously measured by the research group, using a high-pressure microbalance from Rubotherm GmbH (Germany) – gravimetric. The results obtained using both apparatuses are coincident thus validating the good operation of the volumetric unit upgraded in this work. Furthermore, the adsorption equilibrium of CO2 at 303K and 0 - 10 bar on Metal-Organic Frameworks (MOFs) Cu-BTC and Fe-BTC was also studied. The CO2 adsorption equilibrium results for both MOFs were compared with the literature results showing good agreement, which confirms the good quality of the experimental results obtained in the new volumetric unit. Cu-BTC sample showed significantly higher CO2 adsorption capacity when compared with the Fe-BTC sample. The revamping of the volumetric unit included a new valve configuration in order to allow testing an alternative method for the measurement of adsorption equilibrium. This new method was employed to measure the adsorption equilibrium of CO2 on ANG6 and ACHM at 303, 323 and 353K within 0-10 bar. The good quality of the obtained experimental data was testified by comparison with data previously obtained by the research group in a gravimetric apparatus.

UAV - based imagery processing using structure from motion and remote sensing technology

With the recent advances in technology and miniaturization of devices such as GPS or IMU, Unmanned Aerial Vehicles became a feasible platform for a Remote Sensing applications. The use of UAVs compared to the conventional aerial platforms provides a set of advantages such as higher spatial resolution of the derived products. UAV - based imagery obtained by a user grade cameras introduces a set of problems which have to be solved, e. g. rotational or angular differences or unknown or insufficiently precise IO and EO camera parameters. In this work, UAV - based imagery of RGB and CIR type was processed using two different workflows based on PhotoScan and VisualSfM software solutions resulting in the DSM and orthophoto products. Feature detection and matching parameters influence on the result quality as well as a processing time was examined and the optimal parameter setup was presented. Products of the both workflows were compared in terms of a quality and a spatial accuracy. Both workflows were compared by presenting the processing times and quality of the results. Finally, the obtained products were used in order to demonstrate vegetation classification. Contribution of the IHS transformations was examined with respect to the classification accuracy.

Fatigue life assessment of endodontic instruments subjected to multi planar curvature

This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.